Camera Specifications

• CCD Sensor : 1/4 Interline Transfer CCD
• Zoom Magnification : x10 Optical Zoom, x10 Digital Zoom(combine x100 Zoom)
• Day & Night Function
• Various Focus Mode : Auto-Focus / Manual Focus / Semi-Auto Focus
• Independent & Simultaneous Camera Characteristic Setup in Preset operation

Powerful Pan/Tilt Functions

• Max. 360°/sec high speed Pan/Tilt Motion
• Using Vector Drive Technology, Pan/Tilt motions are accomplished in a shortest path. As a result, time to target view is reduced dramatically and the video on the monitor is very natural to watch.
• For jog operation using a controller, since ultra slow speed 0.05°/sec can be reached, it is very easy to locate camera to desired target view. Additionally it is easy to move camera to a desired position with zoom-proportional pan/tilt movement.

Preset, Pattern, Swing, Group, Privacy Mask and More...

• Max. 127 Presets are assignable and characteristics of each preset can be set up independently, such as White Balance, Auto Exposure, Label and so on.
• Max. 8 set of Swing action can be stored. This enables to move camera repetitively between two preset positions with designated speed.
• Max. 4 of Patterns can be recorded and played back. This enables to move camera to follow any trajectory operated by joystick as closely as possible.
• Max. 8 set of Group action can be stored. This enables to move camera repetitively with combination of preset or Pattern or Swing. A Group is composed of max. 20 entities of Preset/Pattern/Swings.
• Privacy Masks are assignable, not to intrude on other's privacy. (4 Privacy Zones)

PTZ(Pan/Tilt/Zoom) Control

• With RS-485 communication, max. 255 of cameras can be controlled at the same time.
• Pelco-D or Pelco-P protocol can be selected as a control protocol in the current version of firmware.

OSD(On Screen Display)

• OSD Menu is provided to display the status of camera and to configure the functions interactively.
• The information such as ID, Pan/Tilt Angle, Alarm Input and Preset can be displayed on screen.

Alarm I/O Functions

• 4 alarm sensor Inputs are available.
• To reject external electric noise and shock perfectly, alarm sensor Input is decoupled with photo coupler.
• The signal range of sensor input is from DC 5.0 to 12.0 volts to adopt various applications.
• If an external sensor is activated, camera can be set to move to the corresponding Preset position.

Reserved Presets for Special Purpose

• Most camera characteristics can be set up easily and directly with reserved preset, not entering into OSD menu. For more information, refer to Reserved Preset in this manual.

Easy Installation and Perfect Outdoor Environment Compatibility

• Fans and heaters are built-in in camera for cold and hot temperature environment. Also idealistic mechanical design protects camera from water and dust. (IP66 when installed properly with well mount bracket only)
• It is easy to install and repair camera